| |
|
|
Ground / Earth Continuity Tester |
|
| |
Technical Specification (All specifications are valid after warm up of 30 minutes) |
Power: 230V AC, ± 10 % , 50 Hz
Resistance Measurement Range: 0 to 200 milli Ohm
Test Current: 30 A ± 1% AC
Open circuit voltage: 8V, AC
Current Waveform: Sinusoidal
Acceptable setting: by press to set switch & potentiometer, using digital milli Ohm meter
Programmable Timer: 1 to 60 sec
Metering: 3 ½ digit Digital V , A and milli Ohm meter
Indication Accuracy: V: 1.5% of reading, A: 1.5% of reading, m Ω: 1.5% of reading± 5dgt
Accuracy of trip resistance: ± 5 m Ω
Indications: Trip, Test On, Test Off
Output test current through high current wire and Earth pin of 3 pin socket.
Accessory: High Current Crocodile wire / Test Probe
Method of measurement: Passing a constant AC current (30A) and measuring a voltage drop across the resistance to be measured. |
|
| |
| |
|
|
